
Torch-On Bitumen Membrane Application SWMS
Applying torch-on bitumen membrane on roofs and decks, with gas torch, fire watch and fall controls, written for Queensland. An editable Word SWMS template.
RG
Written by Ryan Graham, health and safety professional (16 years on Queensland sites)
$49.99 incl. GST
AUD · one-off purchase · instant download
- Instant download · your links arrive by email straight after checkout and work for 3 months, so save your copy
- Your business name and logo · we fill them into every document for A$29 (free on orders of A$500 or more), or edit it yourself in Microsoft Word
- Quality guarantee · we'll fix any problem, then refund you or give store credit if you're still not happy
- Secure checkout · card, Apple Pay or Google Pay through Stripe
About this template
For roofing and waterproofing contractors who apply torch-on membrane to flat and low-pitch roofs and decks. It follows the work in order, from checking the gas torch and edge protection to hot work permits, torching, details and the fire watch afterwards.
Ticked for you: a risk of a person falling more than 2 m (reg 291(a)), because roof edge and deck work is usually above 2 m. Torching in the open is a deliberate flame process, so the contaminated or flammable atmosphere item (reg 291(l), item 11) is not pre-ticked; tick it if you prime or torch in an enclosed or poorly ventilated space where solvent vapour can collect. Also tick, where they apply to your job: work near energised electrical installations or services (reg 291(k)), asbestos disturbance if old roofing is cut or drilled (reg 291(d)), and powered mobile plant such as a crane or hoist in the area (reg 291(o)). A SWMS is required by law only for high risk construction work (WHS Regulation s 299).
New to SWMS? Read What Is A Safe Work Method Statement?
What Is Covered In Our Torch-On Bitumen Membrane Application SWMS?
After the standard pre-start checks, the job steps run from “Inspect the gas torch and cylinders” to “Pack up and store gas equipment”. The hazards and controls include:
- Falls from roof edges and through fragile roofing
- Fire in roof timbers, insulation and cavities
- Gas leaks and flashback from LPG torches
- Burns from the open flame and hot membrane
- Solvent primer vapours igniting
- Falling objects striking people below
- Manual handling of heavy membrane rolls
- Heat stress and sun exposure on the roof
- Smouldering fire after work finishes
- Bitumen fumes and solvent exposure
High Risk Construction Work
These high risk construction work items (WHS Regulation 2011 (Qld) s 291) are already ticked because they are part of this work. Tick any others that apply to your job:
- Involves a risk of a person falling more than 2m
Licences, Training and Competency
- General construction induction training card (white card)
- Site induction
- Training and competency in the torch-on membrane system, gas torch and fire watch duties for each worker using a torch
- Hot work permit holder or issuer trained in the site’s hot work permit system
- Fire watch person trained to use the fire extinguishers on site
- High risk work licence in a scaffolding class (Schedule 3) for anyone erecting scaffolding from which a person or thing could fall more than 4 m; other scaffolding erected by a competent person
- Dogging or crane operator licences where materials are lifted onto the roof (use a separate SWMS for crane lifts)
- First aider on site with burns first aid training
Legislation and Codes of Practice Referenced
- Work Health and Safety Act 2011 (Qld)
- Work Health and Safety Regulation 2011 (Qld)
- Managing the Risk of Falls at Workplaces Code of Practice 2021
- Managing Risks of Hazardous Chemicals in the Workplace Code of Practice 2021
- Hazardous Manual Tasks Code of Practice 2021
- Managing the Work Environment and Facilities Code of Practice 2021
- First Aid in the Workplace Code of Practice 2021
- Scaffolding Code of Practice 2021 (where a scaffold is used)
- Electrical Safety Regulation 2026 (Qld): overhead electric line exclusion zones (ss 10-13 and Sch 2)
What You Get
- An editable Microsoft Word document (13 A4 landscape pages). Type your business, client and job details once and they fill in on every page, with a space for your logo
- 10 job steps for this work, each with its hazards, controls, initial and residual risk scores and the person responsible
- PPE listed for this job: flame-resistant or natural-fibre long-sleeve shirt and long trousers (no synthetic clothing that melts); heat-resistant gloves; safety boots with non-slip soles that do not melt; safety glasses
- Emergency arrangements for: fire, burns and gas leak
- Plus the parts every Work Safety QLD SWMS shares, from the s 291 checklist to the worker sign-on sheet (see the layout in our free SWMS template)
Adjust it for your site, plant and crew, and talk it through with your workers before work starts. Please make sure you read our Disclaimer before downloading this SWMS.
Checked against the Queensland laws and codes of practice listed above. Last reviewed November 2026.
Having trouble with your download? Contact us any time. Please read our Disclaimer before downloading.
How to use it
From download to site in three steps
Buy and download
Check out with card, Apple Pay or Google Pay. Your download buttons appear straight away and the links are emailed to you. Links work for 3 months, so save your copies.
Make it yours
Add your logo and business details in Word or Excel, or tick branding at checkout (A$29) and we add them. Then add your site and job details.
Brief your crew
Talk it through with the workers doing the job, have them sign on, and keep it on site. Review it whenever the job or conditions change.
What format is it?
Microsoft Word. Edit it in Word, or free in Word for the web, and add your own logo and business details. Or let us do it: tick "Add my business name and logo to every document" at checkout (A$29, free on orders of A$500 or more) and fill in a short form after payment.
How do I get it after I pay?
Your download buttons appear as soon as checkout finishes, and the links are emailed to you. You can re-download from your account at any time.
Is it compliant with Queensland law?
It's written around Queensland's Work Health and Safety Act 2011 and Regulation 2011. Tailor it to your site, consult your workers and review it whenever conditions change; no template can guarantee compliance on its own.
What if it isn't right for my job?
If it doesn't match its description or has a fault, tell us and we'll fix it. If you're still not happy, we'll refund you or give you store credit, your choice. Check the sample pages first, as we don't refund a change of mind.
Only logged in customers who have purchased this product may leave a review.
More templates like this



Roof Tile Cutting SWMS
$49.99




Reviews