Skip to content

Roof Tile Bedding and Pointing SWMS

Re-bedding and pointing ridge and hip roof tiles in Queensland: mortar handling, cement burns, pitched roof access, edge protection and falls. An editable Word SWMS template.

RG

Written by Ryan Graham, health and safety professional (16 years on Queensland sites)

$49.99 incl. GST

AUD · one-off purchase · instant download

  • Instant download · your links arrive by email straight after checkout and work for 3 months, so save your copy
  • Your business name and logo · we fill them into every document for A$29 (free on orders of A$500 or more), or edit it yourself in Microsoft Word
  • Quality guarantee · we'll fix any problem, then refund you or give store credit if you're still not happy
  • Secure checkout · card, Apple Pay or Google Pay through Stripe

About this template

For roof tilers, roof restorers and builders who re-bed and point ridge and hip tiles on existing roofs. It follows the job from the roof inspection and access set-up through removing old pointing, mixing mortar and bedding the tiles, to washing off and handover.

Re-bedding and pointing is repair and maintenance of a structure and is construction work (WHS Regulation s 289(1)), unless it is minor repair work (s 289(3)(d)). Work with a risk of a fall of more than 2 metres is high risk construction work (s 291(a)), so the falls item is ticked and a SWMS is required by law (s 299). Tick the asbestos item if old sheeting may be disturbed, and the silica item if power tools are used on old pointing. Laying new tiles and roof restoration need their own SWMS.

New to SWMS? Read What Is A Safe Work Method Statement?

What Is Covered In Our Roof Tile Bedding and Pointing SWMS?

After the standard pre-start checks, the job steps run from “Plan the job and inspect the roof” to “Clean up, remove edge protection and hand over”. The hazards and controls include:

  • Falls from roof edges and ladders
  • Sliding or falling on steep tiled roofs
  • Cracked tiles and loose ridge tiles
  • Cement burns and dermatitis
  • Dust from removing old pointing
  • Asbestos in older eaves and flashings
  • Tiles and mortar falling on people below
  • Contact with overhead power lines
  • Slippery slurry and wash water
  • Strain from lifting bags and tiles
  • Heat, sun and wind on the roof
  • Cement slurry entering stormwater

High Risk Construction Work

These high risk construction work items (WHS Regulation 2011 (Qld) s 291) are already ticked because they are part of this work. Tick any others that apply to your job:

  • Involves a risk of a person falling more than 2m

Licences, Training and Competency

  • General construction induction training card (white card) for construction work
  • Site induction
  • Roofing or tiling experience in bedding and pointing, or work under the direct supervision of someone who has it
  • Competent person to assess the roof, approve walkways and anchor points, and inspect edge protection
  • Training in the fall protection used and in the rescue plan
  • Asbestos awareness training, and training under WHS Regulation s 445 for any worker who may be involved in asbestos-related work
  • Boom-type elevating work platform licence where the boom length is 11 m or more (Schedule 3)
  • Scaffolding licence for scaffold where a person or object could fall more than 4 m (erected under a separate scaffolding SWMS)
  • First aid equipment, facilities and trained first aiders (or access to them) as the work needs (WHS Regulation s 42)

Legislation and Codes of Practice Referenced

  • Work Health and Safety Act 2011 (Qld)
  • Work Health and Safety Regulation 2011 (Qld)
  • Managing the Risk of Falls at Workplaces Code of Practice 2021
  • Hazardous Manual Tasks Code of Practice 2021
  • Managing Risks of Hazardous Chemicals in the Workplace Code of Practice 2021
  • Managing Risks of Plant in the Workplace Code of Practice 2021
  • How to Manage and Control Asbestos in the Workplace Code of Practice 2021
  • Managing the Work Environment and Facilities Code of Practice 2021
  • First Aid in the Workplace Code of Practice 2021
  • How to Manage Work Health and Safety Risks Code of Practice 2021
  • Electrical Safety Act 2002 (Qld)
  • Electrical Safety Regulation 2026 (Qld): overhead power line exclusion zones in schedule 2
  • Electrical Safety Code of Practice 2020 – Working near overhead and underground electric lines (distances come from the 2026 Regulation)
  • WorkSafe Queensland guidance: Managing the risk of falls while working on roofs in housing construction (guidance, not a code)

What You Get

  • An editable Microsoft Word document (15 A4 landscape pages). Type your business, client and job details once and they fill in on every page, with a space for your logo
  • 11 job steps for this work, each with its hazards, controls, initial and residual risk scores and the person responsible
  • PPE listed for this job: safety boots with good grip on tiles; long-sleeve shirt and long pants, with wrist cover at the gloves; waterproof or nitrile-coated gloves for wet mortar; cut-resistant gloves for handling tiles
  • Emergency arrangements for: fall from a roof or ladder, cement in the eye or on skin and contact with a power line
  • Plus the parts every Work Safety QLD SWMS shares, from the s 291 checklist to the worker sign-on sheet (see the layout in our free SWMS template)

Adjust it for your site, plant and crew, and talk it through with your workers before work starts. Please make sure you read our Disclaimer before downloading this SWMS.

Checked against the Queensland laws and codes of practice listed above. Last reviewed November 2026.

Having trouble with your download? Contact us any time. Please read our Disclaimer before downloading.

How to use it

From download to site in three steps

Buy and download

Check out with card, Apple Pay or Google Pay. Your download buttons appear straight away and the links are emailed to you. Links work for 3 months, so save your copies.

Make it yours

Add your logo and business details in Word or Excel, or tick branding at checkout (A$29) and we add them. Then add your site and job details.

Brief your crew

Talk it through with the workers doing the job, have them sign on, and keep it on site. Review it whenever the job or conditions change.

FAQ

Before you buy

Something else? Ask us and a real person will reply.

What format is it?

Microsoft Word. Edit it in Word, or free in Word for the web, and add your own logo and business details. Or let us do it: tick "Add my business name and logo to every document" at checkout (A$29, free on orders of A$500 or more) and fill in a short form after payment.

How do I get it after I pay?

Your download buttons appear as soon as checkout finishes, and the links are emailed to you. You can re-download from your account at any time.

Is it compliant with Queensland law?

It's written around Queensland's Work Health and Safety Act 2011 and Regulation 2011. Tailor it to your site, consult your workers and review it whenever conditions change; no template can guarantee compliance on its own.

What if it isn't right for my job?

If it doesn't match its description or has a fault, tell us and we'll fix it. If you're still not happy, we'll refund you or give you store credit, your choice. Check the sample pages first, as we don't refund a change of mind.

Reviews

Only logged in customers who have purchased this product may leave a review.

More templates like this