
Soft Washing SWMS
Soft washing roofs, walls and surfaces with low pressure and chemicals in Queensland, covering chemical exposure, runoff, slippery surfaces and falls. An editable Word SWMS template for Queensland.
RG
Written by Ryan Graham, health and safety professional (16 years on Queensland sites)
$39.99 incl. GST
AUD · one-off purchase · instant download
- Instant download · your links arrive by email straight after checkout and work for 3 months, so save your copy
- Your business name and logo · we fill them into every document for A$29 (free on orders of A$500 or more), or edit it yourself in Microsoft Word
- Quality guarantee · we'll fix any problem, then refund you or give store credit if you're still not happy
- Secure checkout · card, Apple Pay or Google Pay through Stripe
About this template
For pressure cleaning and exterior cleaning businesses who treat roofs, walls, pavers and render with low-pressure chemical washes. It follows the job from the surface and asbestos check to power lines, chemical mixing, application, rinsing and run-off, access at height and pack-up.
A SWMS is required by law for high risk construction work (WHS Regulation s 299), and this plan requires one for every soft washing job. No item is pre-ticked. Soft washing that is part of a roof restoration or repair is construction work (WHS Regulation s 289). Tick the items that apply, such as a fall of more than 2 metres or work near energised electrical services.
New to SWMS? Read What Is A Safe Work Method Statement?
What Is Covered In Our Soft Washing SWMS?
After the standard pre-start checks, the job steps run from “Inspect the surface and plan the job” to “Rinse equipment, pack up and leave the site clean”. The hazards and controls include:
- Chemical splashes from hypochlorite and cleaners
- Mixing incompatible chemicals and chlorine gas
- Breathing in spray mist and fumes
- Falls from ladders and roof edges
- Falls through fragile roofing
- Slippery soapy roofs, paths and driveways
- Contact with overhead power lines
- Water into switchboards and fittings
- Chemical run-off to drains and neighbours
- Hose whip and pump hazards
- Heavy drums and manual handling
- Heat and working alone
High Risk Construction Work
None of the high risk construction work items (WHS Regulation 2011 (Qld) s 291) are pre-ticked, because this job is not high risk construction work by itself. Tick any that apply on your site.
Licences, Training and Competency
- Training in the soft wash system: mixing, pump and applicator use, dilution and rinsing
- Training in the cleaning chemicals used (SDS, dilution, incompatible products, spills, eyewash and first aid for splashes)
- Training in the access equipment used and in working on roofs, including fall prevention and rescue where roof work is needed
- Respirator fit testing and training where the SDS or risk assessment calls for respiratory protection
- Training in the identification and safe handling of asbestos for workers the PCBU reasonably believes may be involved in asbestos-related work (WHS Regulation s 445); other workers stop and report suspect material on older roofs, eaves and walls
- No high risk work licence applies to soft washing; a licence is needed only for a boom-type elevating work platform with a boom length of 11 m or more (Schedule 3, item 21)
- General construction induction training card (white card) where the cleaning is construction work, for example cleaning during a roof restoration
- First aid equipment, facilities and trained first aiders (or access to them) as the work needs (WHS Regulation s 42)
Legislation and Codes of Practice Referenced
- Work Health and Safety Act 2011 (Qld)
- Work Health and Safety Regulation 2011 (Qld)
- Work Health and Safety Regulation 2011 (Qld): ss 341, 342, 344, 346, 351 and 354 (labelling, decanted containers, safety data sheets, register, managing chemical risks and reactions)
- Work Health and Safety Regulation 2011 (Qld): ss 78 to 80 (falls), s 446 (no high pressure water on asbestos); ss 306C, 306D and 306K to 306M (construction falls and ladders: apply where the work is construction work, otherwise followed as good practice)
- Work Health and Safety Regulation 2011 (Qld): ss 36, 44 to 46 (hierarchy of control, personal protective equipment), s 60 (hazardous manual tasks), s 48 (remote or isolated work)
- How to Manage Work Health and Safety Risks Code of Practice 2021
- Managing Risks of Hazardous Chemicals in the Workplace Code of Practice 2021
- Labelling of Workplace Hazardous Chemicals Code of Practice 2021
- Managing the Risk of Falls at Workplaces Code of Practice 2021
- Hazardous Manual Tasks Code of Practice 2021
- Managing the Work Environment and Facilities Code of Practice 2021
- First Aid in the Workplace Code of Practice 2021
- How to Manage and Control Asbestos in the Workplace Code of Practice 2021
- Managing Risks of Plant in the Workplace Code of Practice 2021
- Electrical Safety Act 2002 (Qld)
- Electrical Safety Regulation 2026 (Qld): overhead electric line exclusion zones and unsafe distances, ss 10 to 13 and schedule 2
- Electrical Safety Code of Practice 2020 – Working near overhead and underground electric lines (distances come from the 2026 Regulation)
What You Get
- An editable Microsoft Word document (14 A4 landscape pages). Type your business, client and job details once and they fill in on every page, with a space for your logo
- 11 job steps for this work, each with its hazards, controls, initial and residual risk scores and the person responsible
- PPE listed for this job: chemical-resistant gloves, long sleeves and apron or coveralls, and boots, as the SDS requires; safety glasses and a face shield when mixing, decanting or spraying overhead or in wind
- Emergency arrangements for: chemical in eyes or on skin, chlorine gas from mixing chemicals and fall from a roof or ladder
- Plus the parts every Work Safety QLD SWMS shares, from the s 291 checklist to the worker sign-on sheet (see the layout in our free SWMS template)
Adjust it for your site, plant and crew, and talk it through with your workers before work starts. Please make sure you read our Disclaimer before downloading this SWMS.
Checked against the Queensland laws and codes of practice listed above. Last reviewed November 2026.
Having trouble with your download? Contact us any time. Please read our Disclaimer before downloading.
How to use it
From download to site in three steps
Buy and download
Check out with card, Apple Pay or Google Pay. Your download buttons appear straight away and the links are emailed to you. Links work for 3 months, so save your copies.
Make it yours
Add your logo and business details in Word or Excel, or tick branding at checkout (A$29) and we add them. Then add your site and job details.
Brief your crew
Talk it through with the workers doing the job, have them sign on, and keep it on site. Review it whenever the job or conditions change.
What format is it?
Microsoft Word. Edit it in Word, or free in Word for the web, and add your own logo and business details. Or let us do it: tick "Add my business name and logo to every document" at checkout (A$29, free on orders of A$500 or more) and fill in a short form after payment.
How do I get it after I pay?
Your download buttons appear as soon as checkout finishes, and the links are emailed to you. You can re-download from your account at any time.
Is it compliant with Queensland law?
It's written around Queensland's Work Health and Safety Act 2011 and Regulation 2011. Tailor it to your site, consult your workers and review it whenever conditions change; no template can guarantee compliance on its own.
What if it isn't right for my job?
If it doesn't match its description or has a fault, tell us and we'll fix it. If you're still not happy, we'll refund you or give you store credit, your choice. Check the sample pages first, as we don't refund a change of mind.
Only logged in customers who have purchased this product may leave a review.







Reviews