
Overhead Crane SWMS
Operating overhead bridge and gantry cranes in workshops: slinging, load swing, pendant controls and rail inspection, for. An editable Word SWMS template for Queensland.
RG
Written by Ryan Graham, health and safety professional (16 years on Queensland sites)
$39.99 incl. GST
AUD · one-off purchase · instant download
- Instant download · your links arrive by email straight after checkout and work for 3 months, so save your copy
- Your business name and logo · we fill them into every document for A$29 (free on orders of A$500 or more), or edit it yourself in Microsoft Word
- Quality guarantee · we'll fix any problem, then refund you or give store credit if you're still not happy
- Secure checkout · card, Apple Pay or Google Pay through Stripe
About this template
For workshops, factories and yards that use overhead bridge or gantry cranes. It follows the work from the pre-use check and lift planning through slinging, travel and landing to isolation, rail inspection at height and fault response. It does not cover mobile or tower cranes.
Operating an overhead crane in a workshop is not construction work, so the high risk construction work list in the WHS Regulation (s 291) does not apply, no item is pre-ticked and s 299 does not require a SWMS for it; the document works as a written safe work procedure and task risk assessment, and the fall of more than 2 metres item (s 291(a)) should be ticked on the form only if the rail inspection or other work at height forms part of construction work.
New to SWMS? Read What Is A Safe Work Method Statement?
What Is Covered In Our Overhead Crane SWMS?
After the standard pre-start checks, the job steps run from “Pre-use inspection of the crane, controls and lifting gear” to “Inspect rails, bridge and runway at height”. The hazards and controls include:
- Dropped loads from failed brakes, gear or hooks
- Overloading the crane or lifting gear
- Loads slipping from poorly rigged slings
- Load swing striking people and machinery
- Loads carried over people
- Collisions between cranes on the same runway
- Crane stopped with a load suspended
- Unexpected movement during maintenance
- Contact with energised conductor bars
- Falls from the crane bridge and runway
- Hand injuries and manual handling of lifting gear
High Risk Construction Work
None of the high risk construction work items (WHS Regulation 2011 (Qld) s 291) are pre-ticked, because this job is not high risk construction work by itself. Tick any that apply on your site.
Licences, Training and Competency
- High risk work licence for the bridge and gantry crane class where Schedule 3 item 12 applies to the crane (operated from a permanent cabin or control station on the crane, or by remote control with more than 3 powered operations); that class includes load estimation and slinging
- High risk work licence in the dogging class, or a higher rigging class, for anyone who slings a load or directs the operator when the load is out of the operator’s view, unless their crane licence covers slinging (Schedule 19, dogging work)
- Operators of floor-controlled pendant cranes trained and verified as competent on that crane, its controls, its rated capacity and the lifting gear used; the Regulation does not say whether a pendant counts as a control station or remote control, so confirm with the regulator whether item 12 applies to each crane and record the answer
- Trainees work only under the supervision of a licence holder while training towards the licence
- Competent person to inspect and maintain the crane and its lifting gear
- Licensed electrician for isolation, testing and repair of the crane’s electrical equipment, supply and conductor bars
- Training in the fall protection system used and in rescue for anyone who works on the crane bridge or runway
- Boom-type EWP licence (boom length 11 m or more) for any EWP used to reach the runway; documented training for other EWPs
- General construction induction training card (white card) if the crane is used on a construction site
- Site induction
Legislation and Codes of Practice Referenced
- Work Health and Safety Act 2011 (Qld)
- Work Health and Safety Regulation 2011 (Qld)
- Managing Risks of Plant in the Workplace Code of Practice 2021
- Managing the Risk of Falls at Workplaces Code of Practice 2021
- Hazardous Manual Tasks Code of Practice 2021
- Managing the Work Environment and Facilities Code of Practice 2021
- How to Manage Work Health and Safety Risks Code of Practice 2021
- First Aid in the Workplace Code of Practice 2021
- Electrical Safety Act 2002 (Qld): electrical work licensing
- Electrical Safety Regulation 2026 (Qld): energised electrical work
- Electrical Safety Code of Practice 2021 – Managing electrical risks in the workplace
- Technical standards listed in the Managing Risks of Plant in the Workplace Code of Practice 2021: AS 1418 (series) Cranes, hoists and winches; AS 2550 (series) Cranes, hoists and winches – Safe use; AS 4991 Lifting devices
What You Get
- An editable Microsoft Word document (14 A4 landscape pages). Type your business, client and job details once and they fill in on every page, with a space for your logo
- 9 job steps for this work, each with its hazards, controls, initial and residual risk scores and the person responsible
- PPE listed for this job: safety boots; hard hat where loads are lifted overhead or when working under or beside the crane; cut-resistant gloves for handling chains, slings and hooks; high-visibility clothing
- Emergency arrangements for: load stuck or crane stopped with a load suspended, person trapped, struck or crushed and fall from the crane bridge or runway, or person hanging in a harness
- Plus the parts every Work Safety QLD SWMS shares, from the s 291 checklist to the worker sign-on sheet (see the layout in our free SWMS template)
Adjust it for your site, plant and crew, and talk it through with your workers before work starts. Please make sure you read our Disclaimer before downloading this SWMS.
Checked against the Queensland laws and codes of practice listed above. Last reviewed October 2026.
Having trouble with your download? Contact us any time. Please read our Disclaimer before downloading.
How to use it
From download to site in three steps
Buy and download
Check out with card, Apple Pay or Google Pay. Your download buttons appear straight away and the links are emailed to you. Links work for 3 months, so save your copies.
Make it yours
Add your logo and business details in Word or Excel, or tick branding at checkout (A$29) and we add them. Then add your site and job details.
Brief your crew
Talk it through with the workers doing the job, have them sign on, and keep it on site. Review it whenever the job or conditions change.
What format is it?
Microsoft Word. Edit it in Word, or free in Word for the web, and add your own logo and business details. Or let us do it: tick "Add my business name and logo to every document" at checkout (A$29, free on orders of A$500 or more) and fill in a short form after payment.
How do I get it after I pay?
Your download buttons appear as soon as checkout finishes, and the links are emailed to you. You can re-download from your account at any time.
Is it compliant with Queensland law?
It's written around Queensland's Work Health and Safety Act 2011 and Regulation 2011. Tailor it to your site, consult your workers and review it whenever conditions change; no template can guarantee compliance on its own.
What if it isn't right for my job?
If it doesn't match its description or has a fault, tell us and we'll fix it. If you're still not happy, we'll refund you or give you store credit, your choice. Check the sample pages first, as we don't refund a change of mind.
Only logged in customers who have purchased this product may leave a review.







Reviews