Pavement Stabilisation SWMS

For road contractors and earthmoving crews stabilising pavements with lime or cement, spreader trucks and recycler or stabiliser machines. It follows the job in order, from planning and services checks to receiving bulk binder, spreading, mixing, compacting, maintenance and wash-down. General road construction is covered by a separate SWMS.

The reg 291 items for a road in use (13) and powered mobile plant (14) are ticked. Tick the optional contaminated atmosphere item (11) if the pavement material contains crystalline silica or the assessment finds a contaminated atmosphere from binder dust.

Learn More: What Is A Safe Work Method Statement?
Have you ever been asked to provide a SWMS on a project in Queensland? Read our guide to what a Safe Work Method Statement is and when you need one.

What Is Covered In Our Pavement Stabilisation SWMS?

The job steps run in the order the work is done, from pre-start checks to finishing up. The hazards and controls include:

• Caustic burns from lime and cement
• Lime and cement dust in the eyes and lungs
• Bulk tanker hose failure during unloading
• Contact with the recycler rotor and picks
• Spreader and recycler collisions with workers
• Worker struck by traffic beside the work zone
• Contact with overhead power lines
• Hitting underground services
• Slurry running into drains
• Noise, heat and fatigue

High Risk Construction Work

These high risk construction work items (WHS Regulation 2011 (Qld) s 291) are already ticked because they are part of this work. Tick any others that apply to your job:

• Is carried out on, in or adjacent to a road, railway, shipping lane or other traffic corridor that is in use by traffic other than pedestrians
• Is carried out in an area at a workplace in which there is any movement of powered mobile plant

Licences, Training and Competency

• General construction induction training card (white card) for construction work, and site induction
• Training in working near traffic for everyone on or beside a road (the Working in Proximity to Traffic course is the one the Traffic Management for Construction or Maintenance Work Code of Practice 2008 names)
• Accredited traffic controllers for anyone who stops or directs traffic; set-up of the traffic control layout has its own SWMS
• Recycler, stabiliser and spreader operators trained and assessed on each machine (no high risk work licence class in Schedule 3 of the WHS Regulation covers a recycler, stabiliser, spreader, roller or grader)
• Driver licence of the right class for each truck and bulk tanker driven on a public road
• Crew trained in the lime and cement SDS, caustic burn and eye first aid, and an adequate number of workers trained in first aid (WHS Regulation s 42)
• Crystalline silica training where the assessment finds the processing high risk (WHS Regulation s 529CD), with a record kept
• Spotters briefed on signals, blind spots, exclusion zones and power line distances

Legislation and Codes of Practice Referenced

• Work Health and Safety Act 2011 (Qld)
• Work Health and Safety Regulation 2011 (Qld)
• Traffic Management for Construction or Maintenance Work Code of Practice 2008
• Transport Operations (Road Use Management – Accreditation and Other Provisions) Regulation 2015 (Qld): traffic controllers, sections 51 to 55
• Managing Risks of Hazardous Chemicals in the Workplace Code of Practice 2021
• Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice 2021
• Labelling of Workplace Hazardous Chemicals Code of Practice 2021
• Managing Risks of Plant in the Workplace Code of Practice 2021
• Managing respirable crystalline silica dust exposure in construction and manufacturing of construction elements Code of Practice 2022
• Managing Noise and Preventing Hearing Loss at Work Code of Practice 2021
• Hazardous Manual Tasks Code of Practice 2021
• Managing the Work Environment and Facilities Code of Practice 2021
• How to Manage Work Health and Safety Risks Code of Practice 2021
• First Aid in the Workplace Code of Practice 2021
• Electrical Safety Act 2002 (Qld)
• Electrical Safety Regulation 2026 (Qld): ss 10 to 13 and sch 2 (overhead exclusion zones); ss 14 and 15 (underground lines)
• Safe Work Australia model Code of Practice: Managing the risk of fatigue at work (guidance)

What You Get

• An editable Microsoft Word document (14 pages), laid out on A4 landscape pages
• Business, client, job and document details typed once and filled in on every page, plus a space for your logo
• The high risk construction work checklist, worded as WHS Regulation s 291, and the construction project question (s 292)
• A worker and health and safety representative consultation record
• Qualifications, plant, PPE, hazardous chemicals, safety equipment, permits, references and emergency arrangements filled in for this work
• A 5 x 5 risk matrix, and job steps with initial and residual risk scores and the people responsible
• Implementing, monitoring and review requirements, an additional controls log, revision history and a worker sign-on sheet

Review and adjust it for your site, your plant and the way your crew does the job, and talk it through with your workers before work starts. If you have any trouble downloading this SWMS, you can contact us at any time. Please make sure you read our Disclaimer before downloading this SWMS.