Skip to content

Steel Decking Installation SWMS

Installing steel decking on structural frames in Queensland, covering edge falls, lifting bundles, wind, cutting and fixing. An editable Word SWMS template for Queensland.

RG

Written by Ryan Graham, health and safety professional (16 years on Queensland sites)

$49.99 incl. GST

AUD · one-off purchase · instant download

  • Instant download · your links arrive by email straight after checkout and work for 3 months, so save your copy
  • Your business name and logo · we fill them into every document for A$29 (free on orders of A$500 or more), or edit it yourself in Microsoft Word
  • Quality guarantee · we'll fix any problem, then refund you or give store credit if you're still not happy
  • Secure checkout · card, Apple Pay or Google Pay through Stripe

About this template

Suits steel erectors and decking contractors who lay and fix steel decking and formwork sheets on structural frames. It follows the work in order, from frame sign-off, fall protection and lifting bundles to laying in wind, cutting, fixing, openings and handover. Structural steel erection is covered by a separate SWMS.

Work with a risk of a fall of more than 2 metres, and work in an area where powered mobile plant moves, are high risk construction work (WHS Regulation s 291(a) and (o)), so those items are ticked. Tick the others the job involves, such as energised electrical services near the frame, a road in use below, or hot work in a flammable area.

New to SWMS? Read What Is A Safe Work Method Statement?

What Is Covered In Our Steel Decking Installation SWMS?

After the standard pre-start checks, the job steps run from “Plan the decking sequence and lifts” to “Pack up and leave the deck safe”. The hazards and controls include:

  • Falls from open edges and frame beams
  • Falls through openings in the deck
  • Frame instability under deck bundles
  • Dropped bundles during crane lifts
  • Sheets lifted by wind
  • Falling objects striking people below
  • Cuts from sharp sheet edges
  • Sparks and fume from cutting and stud welding
  • Contact with overhead power lines
  • Manual handling of long sheets
  • Powder-actuated tool misfire
  • Loads placed on unfixed deck

High Risk Construction Work

These high risk construction work items (WHS Regulation 2011 (Qld) s 291) are already ticked because they are part of this work. Tick any others that apply to your job:

  • Involves a risk of a person falling more than 2m
  • Is carried out in an area at a workplace in which there is any movement of powered mobile plant

Licences, Training and Competency

  • General construction induction training card (white card) for construction work
  • Crane operator holding the high risk work licence for the class of crane used (WHS Regulation Schedule 3) when a crane lifts the bundles
  • Dogging licence (Schedule 3 item 4) for anyone who slings a bundle or directs the crane operator when the load is out of the operator’s view
  • Basic rigging licence (or a higher class) (Schedule 3 item 5(2)) is needed only where the work is rigging work as defined in Schedule 19, that is using mechanical load-shifting equipment and gear to move, place or secure a load, or setting up or dismantling cranes or hoists; item 5(2) lists structural steel erection and safety nets and static lines, and laying and fixing deck sheets is not listed
  • Forklift truck licence (Schedule 3) for anyone driving a forklift to unload bundles
  • Operator licence for the class of boom-type elevating work platform of 11 m or more (Schedule 3) where one is used; otherwise operators trained and assessed on the EWP model
  • Powder-actuated fastening tool operators trained by the supplier or a competent trainer
  • Competent person (an engineer or experienced steel erector) to confirm frame stability, deck bearing, sequence and edge protection before decking starts
  • Site induction and the principal contractor’s permit to work at height where one is used

Legislation and Codes of Practice Referenced

  • Work Health and Safety Act 2011 (Qld)
  • Work Health and Safety Regulation 2011 (Qld)
  • Steel Construction Advisory Standard 2004
  • Managing the Risk of Falls at Workplaces Code of Practice 2021
  • Mobile Crane Code of Practice 2024
  • Tower Crane Code of Practice 2017
  • Managing Risks of Plant in the Workplace Code of Practice 2021
  • Hazardous Manual Tasks Code of Practice 2021
  • Welding Processes Code of Practice 2021
  • Managing Noise and Preventing Hearing Loss at Work Code of Practice 2021
  • Safe Design of Structures Code of Practice 2021
  • Electrical Safety Regulation 2026 (Qld): overhead power line exclusion zones (schedule 2)

What You Get

  • An editable Microsoft Word document (14 A4 landscape pages). Type your business, client and job details once and they fill in on every page, with a space for your logo
  • 9 job steps for this work, each with its hazards, controls, initial and residual risk scores and the person responsible
  • PPE listed for this job: safety boots with ankle support; hard hat with chin strap for work at height; high-visibility clothing; cut-resistant gloves for handling sheets and offcuts
  • Emergency arrangements for: dropped bundle or sheet
  • Plus the parts every Work Safety QLD SWMS shares, from the s 291 checklist to the worker sign-on sheet (see the layout in our free SWMS template)

Adjust it for your site, plant and crew, and talk it through with your workers before work starts. Please make sure you read our Disclaimer before downloading this SWMS.

Checked against the Queensland laws and codes of practice listed above. Last reviewed November 2026.

Having trouble with your download? Contact us any time. Please read our Disclaimer before downloading.

How to use it

From download to site in three steps

Buy and download

Check out with card, Apple Pay or Google Pay. Your download buttons appear straight away and the links are emailed to you. Links work for 3 months, so save your copies.

Make it yours

Add your logo and business details in Word or Excel, or tick branding at checkout (A$29) and we add them. Then add your site and job details.

Brief your crew

Talk it through with the workers doing the job, have them sign on, and keep it on site. Review it whenever the job or conditions change.

FAQ

Before you buy

Something else? Ask us and a real person will reply.

What format is it?

Microsoft Word. Edit it in Word, or free in Word for the web, and add your own logo and business details. Or let us do it: tick "Add my business name and logo to every document" at checkout (A$29, free on orders of A$500 or more) and fill in a short form after payment.

How do I get it after I pay?

Your download buttons appear as soon as checkout finishes, and the links are emailed to you. You can re-download from your account at any time.

Is it compliant with Queensland law?

It's written around Queensland's Work Health and Safety Act 2011 and Regulation 2011. Tailor it to your site, consult your workers and review it whenever conditions change; no template can guarantee compliance on its own.

What if it isn't right for my job?

If it doesn't match its description or has a fault, tell us and we'll fix it. If you're still not happy, we'll refund you or give you store credit, your choice. Check the sample pages first, as we don't refund a change of mind.

Reviews

Only logged in customers who have purchased this product may leave a review.

More templates like this