
Reinforcement Cage Fabrication and Lifting SWMS
Reinforcement cage fabrication and lifting in Queensland: bar handling, cutting, tying, welding and crane lifts. An editable Word SWMS template.
RG
Written by Ryan Graham, health and safety professional (16 years on Queensland sites)
$49.99 incl. GST
AUD · one-off purchase · instant download
- Instant download · your links arrive by email straight after checkout and work for 3 months, so save your copy
- Your business name and logo · we fill them into every document for A$29 (free on orders of A$500 or more), or edit it yourself in Microsoft Word
- Quality guarantee · we'll fix any problem, then refund you or give store credit if you're still not happy
- Secure checkout · card, Apple Pay or Google Pay through Stripe
About this template
Suits piling, concrete and civil contractors who fabricate reinforcement cages on or off site and lift them into position with a crane. It follows the work from the engineer’s lifting points and lift plan through bar handling, tying, welding, slinging and lowering.
One item is ticked for you: movement of powered mobile plant, because a crane, forklift and trucks work in the area (WHS Regulation s 291), so a SWMS is required before the work starts (s 299). Add the energised electrical installations or services item if the crane works near overhead lines, a fall of more than 2 metres or the shaft and trench item if cages are lowered into bores or pits, and any other item that applies.
New to SWMS? Read What Is A Safe Work Method Statement?
What Is Covered In Our Reinforcement Cage Fabrication and Lifting SWMS?
After the standard pre-start checks, the job steps run from “Plan the cage, the lift and the fabrication area” to “Pack up and clear the area”. The hazards and controls include:
- Cuts and impalement on bar ends
- Cage falling during crane lifts
- Overloaded or unbalanced cages
- Unsuitable or unengineered lifting points
- Loads over people and exclusion zones
- Rolling and falling bundles of bar
- Cutting and bending machine hazards
- Hot work and welding fume
- Repetitive strain and manual handling
- Overhead power lines near the crane
- Open bores and pits at the lift
- Noise from cutting and bending
High Risk Construction Work
These high risk construction work items (WHS Regulation 2011 (Qld) s 291) are already ticked because they are part of this work. Tick any others that apply to your job:
- Is carried out in an area at a workplace in which there is any movement of powered mobile plant
Licences, Training and Competency
- General construction induction training card (white card) for construction work
- High risk work licence for the class of crane that lifts the cage (Schedule 3)
- High risk work licence in the dogging class, or a higher rigging class (Schedule 3), for anyone who slings a load or directs the plant operator in moving a load when the load is out of the operator’s view (Schedule 19, dogging work)
- Forklift licence class if a forklift is used to unload bar (Schedule 3)
- Trained and competent bar benders, cutters and tiers
- Competent person (engineer) to certify the cage design and lifting method where anyone could be struck if the cage falls
- Workers trained in hot work where cage components are welded
- Site induction
Legislation and Codes of Practice Referenced
- Work Health and Safety Act 2011 (Qld)
- Work Health and Safety Regulation 2011 (Qld)
- Mobile Crane Code of Practice 2024
- Managing Risks of Plant in the Workplace Code of Practice 2021
- Hazardous Manual Tasks Code of Practice 2021
- Managing Noise and Preventing Hearing Loss at Work Code of Practice 2021
- Welding Processes Code of Practice 2021
- Managing Risks of Hazardous Chemicals in the Workplace Code of Practice 2021
- Managing the Work Environment and Facilities Code of Practice 2021
- How to Manage Work Health and Safety Risks Code of Practice 2021
- First Aid in the Workplace Code of Practice 2021
- Safe Design of Structures Code of Practice 2021
- Formwork Code of Practice 2016 (projecting reinforcing steel)
- Electrical Safety Act 2002 (Qld)
- Electrical Safety Regulation 2026 (Qld): overhead line exclusion zones and unsafe distances (ss 10, 11 and 13 and sch 2) and underground electric lines (ss 14 and 15)
- Electrical Safety Code of Practice 2020 – Working near overhead and underground electric lines
What You Get
- An editable Microsoft Word document (12 A4 landscape pages). Type your business, client and job details once and they fill in on every page, with a space for your logo
- 10 job steps for this work, each with its hazards, controls, initial and residual risk scores and the person responsible
- PPE listed for this job: safety boots; high-visibility clothing; hard hat; safety glasses
- Emergency arrangements for: impalement or serious cut, load or cage falls and power line contact
- Plus the parts every Work Safety QLD SWMS shares, from the s 291 checklist to the worker sign-on sheet (see the layout in our free SWMS template)
Adjust it for your site, plant and crew, and talk it through with your workers before work starts. Please make sure you read our Disclaimer before downloading this SWMS.
Checked against the Queensland laws and codes of practice listed above. Last reviewed November 2026.
Having trouble with your download? Contact us any time. Please read our Disclaimer before downloading.
How to use it
From download to site in three steps
Buy and download
Check out with card, Apple Pay or Google Pay. Your download buttons appear straight away and the links are emailed to you. Links work for 3 months, so save your copies.
Make it yours
Add your logo and business details in Word or Excel, or tick branding at checkout (A$29) and we add them. Then add your site and job details.
Brief your crew
Talk it through with the workers doing the job, have them sign on, and keep it on site. Review it whenever the job or conditions change.
What format is it?
Microsoft Word. Edit it in Word, or free in Word for the web, and add your own logo and business details. Or let us do it: tick "Add my business name and logo to every document" at checkout (A$29, free on orders of A$500 or more) and fill in a short form after payment.
How do I get it after I pay?
Your download buttons appear as soon as checkout finishes, and the links are emailed to you. You can re-download from your account at any time.
Is it compliant with Queensland law?
It's written around Queensland's Work Health and Safety Act 2011 and Regulation 2011. Tailor it to your site, consult your workers and review it whenever conditions change; no template can guarantee compliance on its own.
What if it isn't right for my job?
If it doesn't match its description or has a fault, tell us and we'll fix it. If you're still not happy, we'll refund you or give you store credit, your choice. Check the sample pages first, as we don't refund a change of mind.
Only logged in customers who have purchased this product may leave a review.
More templates like this




Concrete Wire Saw SWMS
$49.99




Reviews