Skip to content

Metal Roof Sheeting Installation SWMS

Installing metal roof sheeting on new or existing Queensland buildings, from roof edge protection and lifting packs to flashings and pack-up. An editable Word SWMS template for Queensland.

RG

Written by Ryan Graham, health and safety professional (16 years on Queensland sites)

$49.99 incl. GST

AUD · one-off purchase · instant download

  • Instant download · your links arrive by email straight after checkout and work for 3 months, so save your copy
  • Your business name and logo · we fill them into every document for A$29 (free on orders of A$500 or more), or edit it yourself in Microsoft Word
  • Quality guarantee · we'll fix any problem, then refund you or give store credit if you're still not happy
  • Secure checkout · card, Apple Pay or Google Pay through Stripe

About this template

For roofing contractors and builders who install metal roof sheeting, flashings, ridge capping and gutters. It follows the job in order, from planning the fall protection and checking old roofs for asbestos to lifting sheets, laying them in wind, cutting and fixing, and packing up.

Roof sheeting is high risk construction work when a person could fall more than 2 metres (WHS Regulation s 291), so that is the item ticked; you can also tick energised electrical installations if overhead lines are near the roof and powered mobile plant if a crane or forklift lifts the packs.

New to SWMS? Read What is a safe work method statement?

What is covered in our metal roof sheeting installation SWMS?

After the standard pre-start checks, the job steps run from “Plan the job and check the roof and its structure” to “Pack up and hand over”. The hazards and controls include:

  • Falls from the roof edge and from ladders
  • Falls through skylights, translucent sheets and fragile roofing
  • Slipping on wet, dewy or steeply pitched metal sheets
  • Wind catching long sheets
  • Cuts from sheet edges and flashings
  • Contact with overhead power lines
  • Roof frames overloaded by stacked sheet packs
  • Being struck by cranes, forklifts and delivery loads
  • Fire from sparks and hot swarf near insulation
  • Noise from cutting and fixing
  • Heat illness and hot metal sheets
  • Disturbing asbestos in old roofing
  • Falling offcuts and tools

High risk construction work

These high risk construction work items (WHS Regulation 2011 (Qld) s 291) are already ticked because they are part of this work. Tick any others that apply to your job:

  • Involves a risk of a person falling more than 2m

Licences, training and competency

  • General construction induction training card (white card)
  • Site induction, including roof access and rescue rules
  • Installers trained and experienced in the roofing system and fixing method
  • Training in the fall protection used (edge protection, travel restraint or fall arrest) and the rescue plan, for users and rescuers
  • Competent person to install travel restraint systems and inspect restraint and fall arrest systems at least every 6 months; engineer or competent person to approve anchors
  • Licence for the class of any crane, forklift truck or vehicle loading crane (10 metre tonnes or more) lifting sheet packs; the dogging class or a higher rigging class (Schedule 3) for anyone who slings loads or directs a plant operator in the movement of a load when the load is out of the operator’s view (Schedule 19, dogging work); boom-type elevating work platform class for a boom of 11 m or more
  • Scaffolding licence for the class of any scaffold used for access or edge protection, where a person or object could fall more than 4 m (erected under a separate Scaffolding SWMS)
  • On existing buildings: workers trained to recognise asbestos and its controls, and a competent person to identify or assume asbestos in old roofing
  • Trained first aider on site

Legislation and codes of practice referenced

  • Work Health and Safety Act 2011 (Qld)
  • Work Health and Safety Regulation 2011 (Qld)
  • Managing the Risk of Falls at Workplaces Code of Practice 2021
  • Scaffolding Code of Practice 2021 (where scaffold is used for access or edge protection)
  • Managing Risks of Plant in the Workplace Code of Practice 2021
  • Mobile Crane Code of Practice 2024 (where a crane lifts sheet packs)
  • Hazardous Manual Tasks Code of Practice 2021
  • Managing Noise and Preventing Hearing Loss at Work Code of Practice 2021
  • Managing the Work Environment and Facilities Code of Practice 2021
  • Managing Risks of Hazardous Chemicals in the Workplace Code of Practice 2021
  • How to Manage and Control Asbestos in the Workplace Code of Practice 2021 (existing roofs)
  • First Aid in the Workplace Code of Practice 2021
  • How to Manage Work Health and Safety Risks Code of Practice 2021
  • Electrical Safety Act 2002 (Qld)
  • Electrical Safety Regulation 2026 (Qld): overhead power line exclusion zones
  • Electrical Safety Code of Practice 2020 – Working near overhead and underground electric lines (distances come from the 2026 Regulation)
  • AS/NZS 4994.2 Temporary edge protection – Roof edge protection – Installation and dismantling (cited in the Falls Code)
  • WorkSafe Queensland guidance: Managing the risk of falls while working on roofs in housing construction (guidance, not a code)
  • Safe Work Australia model Code of Practice: Elevating work platforms (guidance)

What you get

  • An editable Microsoft Word document (16 pages), laid out on A4 landscape pages. Type your business, client and job details once and they fill in on every page, with a space for your logo
  • 10 job steps for this work, each with its hazards, controls, initial and residual risk scores and the person responsible
  • PPE listed for this job: non-slip safety boots with soft soles suited to metal roofing; cut-resistant gloves for handling sheets and flashings; safety glasses when cutting, drilling or fixing
  • Emergency arrangements for: fall or fall through the roof, worker hanging in a harness after an arrested fall and contact with an overhead power line
  • Plus the parts every Work Safety QLD SWMS shares, from the s 291 checklist to the worker sign-on sheet (see the layout in our free SWMS template)

Adjust it for your site, plant and crew, and talk it through with your workers before work starts.

Checked against the Queensland laws and codes of practice listed above. Last reviewed October 2026.

Having trouble with your download? Contact us any time. Please read our Disclaimer before downloading.

How to use it

From download to site in three steps

Buy and download

Check out with card, Apple Pay or Google Pay. Your download buttons appear straight away and the links are emailed to you. Links work for 3 months, so save your copies.

Make it yours

Add your logo and business details in Word or Excel, or tick branding at checkout (A$29) and we add them. Then add your site and job details.

Brief your crew

Talk it through with the workers doing the job, have them sign on, and keep it on site. Review it whenever the job or conditions change.

FAQ

Before you buy

Something else? Ask us and a real person will reply.

What format is it?

Microsoft Word. Edit it in Word, or free in Word for the web, and add your own logo and business details. Or let us do it: tick "Add my business name and logo to every document" at checkout (A$29, free on orders of A$500 or more) and fill in a short form after payment.

How do I get it after I pay?

Your download buttons appear as soon as checkout finishes, and the links are emailed to you. You can re-download from your account at any time.

Is it compliant with Queensland law?

It's written around Queensland's Work Health and Safety Act 2011 and Regulation 2011. Tailor it to your site, consult your workers and review it whenever conditions change; no template can guarantee compliance on its own.

What if it isn't right for my job?

If it doesn't match its description or has a fault, tell us and we'll fix it. If you're still not happy, we'll refund you or give you store credit, your choice. Check the sample pages first, as we don't refund a change of mind.

Reviews

Only logged in customers who have purchased this product may leave a review.

More templates like this