
Intruder Alarm Installation SWMS
Installing intruder alarms in Queensland, covering ladders, ceiling-space cabling, extra low voltage work, drilling and fixing sensors and sirens. An editable Word SWMS template for Queensland.
RG
Written by Ryan Graham, health and safety professional (16 years on Queensland sites)
$39.99 incl. GST
AUD · one-off purchase · instant download
- Instant download · your links arrive by email straight after checkout and work for 3 months, so save your copy
- Your business name and logo · we fill them into every document for A$29 (free on orders of A$500 or more), or edit it yourself in Microsoft Word
- Quality guarantee · we'll fix any problem, then refund you or give store credit if you're still not happy
- Secure checkout · card, Apple Pay or Google Pay through Stripe
About this template
Suits security and alarm installers fitting intruder alarms, sensors, keypads and sirens in homes, shops, offices and industrial sites. It follows the job from survey and access set-up through cabling, drilling, device mounting, control panel and battery installation, commissioning and handover. Mains wiring and ceiling-space entry are covered by separate SWMS.
A SWMS is legally required when the work is high risk construction work, such as work with a risk of a fall of more than 2 m (WHS Regulation ss 291 and 299). Intruder alarm installation is not high risk by itself, so no box is pre-ticked: tick the falls box if a person could fall more than 2 metres, asbestos if it could be disturbed, energised electrical installations if the work is near them, the contaminated atmosphere box if drilling masonry creates silica dust, and any other item that applies. Otherwise this document works as a written safe work procedure or task risk assessment.
Similar job: if it is closer to your work, see the Access Control and Electric Lock Installation SWMS.
New to SWMS? Read What Is A Safe Work Method Statement?
What Is Covered In Our Intruder Alarm Installation SWMS?
After the standard pre-start checks, the job steps run from “Plan the job and survey the building” to “Clean up and hand over”. The hazards and controls include:
- Falls from ladders and step platforms
- Dropped tools and devices striking people below
- Contact with energised mains cables
- Falling through ceilings and heat in ceiling spaces
- Drilling into hidden cables, pipes and asbestos
- Silica dust from drilling masonry
- Noise from drilling and sirens
- Battery short circuits and acid
- Cuts from cable stripping
- Overhead power lines near eaves and poles
- Awkward postures when pulling cable
High Risk Construction Work
None of the high risk construction work items (WHS Regulation 2011 (Qld) s 291) are pre-ticked, because this job is not high risk construction work by itself. Tick any that apply on your site.
Licences, Training and Competency
- General construction induction training card (white card) for construction work, and site induction
- Licensed electrical worker for any mains wiring or hard-wired mains connection (Electrical Safety Act 2002 ss 18 and 55); this is outside the SWMS (use the Electrical Installation SWMS)
- Security or alarm technician competency in the system installed
- Training in ladder and step platform use, and in working near overhead power lines
- Asbestos awareness training for older buildings (WHS Regulation s 445 requires training for workers who may be involved in asbestos removal or asbestos-related work)
- Crystalline silica training where the assessment finds drilling high risk (WHS Regulation s 529CD)
- First aid equipment and facilities, and trained first aiders as the work and site need (WHS Regulation s 42)
Legislation and Codes of Practice Referenced
- Work Health and Safety Act 2011 (Qld)
- Work Health and Safety Regulation 2011 (Qld)
- Work Health and Safety Regulation 2011 (Qld): ss 306A to 306N (falls, ladders and trestle platforms in construction work)
- Work Health and Safety Regulation 2011 (Qld): ss 56 and 57 (noise), s 445 (asbestos training) and ss 529A to 529CD (crystalline silica)
- Managing the Risk of Falls at Workplaces Code of Practice 2021
- Hazardous Manual Tasks Code of Practice 2021
- How to Manage and Control Asbestos in the Workplace Code of Practice 2021
- Managing respirable crystalline silica dust exposure in construction and manufacturing of construction elements Code of Practice 2022
- Managing Noise and Preventing Hearing Loss at Work Code of Practice 2021
- Managing the Work Environment and Facilities Code of Practice 2021
- Managing Risks of Hazardous Chemicals in the Workplace Code of Practice 2021
- First Aid in the Workplace Code of Practice 2021
- How to Manage Work Health and Safety Risks Code of Practice 2021
- Electrical Safety Act 2002 (Qld): ss 14, 18 and 55 (meaning of electrical equipment, electrical work and licence requirement)
- Electrical Safety Regulation 2026 (Qld): s 10 and sch 2 (overhead power line exclusion zones)
- Electrical Safety Code of Practice 2021 – Managing electrical risks in the workplace
- Electrical Safety Code of Practice 2020 – Working near overhead and underground electric lines
What You Get
- An editable Microsoft Word document (13 A4 landscape pages). Type your business, client and job details once and they fill in on every page, with a space for your logo
- 10 job steps for this work, each with its hazards, controls, initial and residual risk scores and the person responsible
- PPE listed for this job: safety boots; safety glasses; hearing protection for drilling and siren testing; cut-resistant or work gloves
- Emergency arrangements for: electric shock and fall from a ladder or through a ceiling
- Plus the parts every Work Safety QLD SWMS shares, from the s 291 checklist to the worker sign-on sheet (see the layout in our free SWMS template)
Adjust it for your site, plant and crew, and talk it through with your workers before work starts. Please make sure you read our Disclaimer before downloading this SWMS.
Checked against the Queensland laws and codes of practice listed above. Last reviewed November 2026.
Having trouble with your download? Contact us any time. Please read our Disclaimer before downloading.
How to use it
From download to site in three steps
Buy and download
Check out with card, Apple Pay or Google Pay. Your download buttons appear straight away and the links are emailed to you. Links work for 3 months, so save your copies.
Make it yours
Add your logo and business details in Word or Excel, or tick branding at checkout (A$29) and we add them. Then add your site and job details.
Brief your crew
Talk it through with the workers doing the job, have them sign on, and keep it on site. Review it whenever the job or conditions change.
What format is it?
Microsoft Word. Edit it in Word, or free in Word for the web, and add your own logo and business details. Or let us do it: tick "Add my business name and logo to every document" at checkout (A$29, free on orders of A$500 or more) and fill in a short form after payment.
How do I get it after I pay?
Your download buttons appear as soon as checkout finishes, and the links are emailed to you. You can re-download from your account at any time.
Is it compliant with Queensland law?
It's written around Queensland's Work Health and Safety Act 2011 and Regulation 2011. Tailor it to your site, consult your workers and review it whenever conditions change; no template can guarantee compliance on its own.
What if it isn't right for my job?
If it doesn't match its description or has a fault, tell us and we'll fix it. If you're still not happy, we'll refund you or give you store credit, your choice. Check the sample pages first, as we don't refund a change of mind.
Only logged in customers who have purchased this product may leave a review.
More templates like this



Crowd Control SWMS
$39.99




Reviews