
Fall Arrest Equipment Inspection and Anchor Testing SWMS
Inspecting harnesses, lanyards, anchors and lifelines and testing anchor points in Queensland, including condemning equipment. An editable Word SWMS template for Queensland.
RG
Written by Ryan Graham, health and safety professional (16 years on Queensland sites)
$49.99 incl. GST
AUD · one-off purchase · instant download
- Instant download · your links arrive by email straight after checkout and work for 3 months, so save your copy
- Your business name and logo · we fill them into every document for A$29 (free on orders of A$500 or more), or edit it yourself in Microsoft Word
- Quality guarantee · we'll fix any problem, then refund you or give store credit if you're still not happy
- Secure checkout · card, Apple Pay or Google Pay through Stripe
About this template
For safety inspectors, riggers, roofing and height safety contractors who inspect fall arrest gear and test anchor points. It follows the job in order, from planning and ground inspection to access, anchor inspection, load testing, condemning and records, and uses the Queensland fall arrest harness rules. Installing anchors is a separate task.
Inspecting and testing anchors on roofs and structures involves a risk of a fall of more than 2 metres, so that item is ticked for you (WHS Regulation s 291) and a SWMS is required before the work starts (s 299). Add any other item that applies. If you only inspect harnesses and lanyards on the ground, untick it and use this as a written safe work procedure.
New to SWMS? Read What Is A Safe Work Method Statement?
What Is Covered In Our Fall Arrest Equipment Inspection and Anchor Testing SWMS?
After the standard pre-start checks, the job steps run from “Plan the inspection and testing and gather the records” to “Return equipment and tidy up”. The hazards and controls include:
- Missed damage to harnesses, lanyards and connectors
- Locking devices failing in a fall
- Falls while reaching anchors on roofs and structures
- Anchors or fixings failing during a load test
- Struck by test rigs or broken lines
- Fragile roof surfaces
- Dropped tools and test gear
- Worn anchors used by mistake
- Condemned equipment returned to service
- Suspension trauma if a harness is loaded
High Risk Construction Work
These high risk construction work items (WHS Regulation 2011 (Qld) s 291) are already ticked because they are part of this work. Tick any others that apply to your job:
- Involves a risk of a person falling more than 2m
Licences, Training and Competency
- General construction induction training card (white card) for construction work, and site induction
- Competent person to inspect the components of each fall arrest system, and to inspect and approve each anchorage point before first use (WHS Regulation s 306I): trained and experienced in the equipment and, for anchors, in testing methods
- Engineer where an anchorage point must be designed, or where the supporting structure, the test method or the test figure is not set by the manufacturer
- Training for anyone who uses a fall arrest harness system in its safe and correct use, and in the rescue plan (WHS Regulation ss 80 and 306I(9))
- Boom-type elevating work platform of 11 m boom length or more: high risk work licence (Schedule 3 item 21)
- No high risk work licence is needed to inspect or test fall arrest equipment; installing anchors and static lines is covered by separate SWMS
- Trained rescuers and a first aider on site
Legislation and Codes of Practice Referenced
- Work Health and Safety Act 2011 (Qld)
- Work Health and Safety Regulation 2011 (Qld)
- Managing the Risk of Falls at Workplaces Code of Practice 2021 (individual fall arrest systems)
- Hazardous Manual Tasks Code of Practice 2021
- Managing the Work Environment and Facilities Code of Practice 2021
- First Aid in the Workplace Code of Practice 2021
- How to Manage Work Health and Safety Risks Code of Practice 2021
- WHS Regulation: s 80 (emergency and rescue procedures), s 291 (high risk construction work), ss 306A-306Q (falls), in particular s 306G (travel restraint) and s 306I (fall arrest harness system)
- AS/NZS 1891.4 Industrial fall-arrest systems and devices: Selection, use and maintenance (cited in the Falls Code)
What You Get
- An editable Microsoft Word document (12 A4 landscape pages). Type your business, client and job details once and they fill in on every page, with a space for your logo
- 8 job steps for this work, each with its hazards, controls, initial and residual risk scores and the person responsible
- PPE listed for this job: safety boots with good grip; hard hat with chin strap where there is any overhead risk; high-visibility clothing; gloves for handling harness hardware and rope
- Emergency arrangements for: fall during testing or inspection, person suspended in a harness and anchor or test equipment fails
- Plus the parts every Work Safety QLD SWMS shares, from the s 291 checklist to the worker sign-on sheet (see the layout in our free SWMS template)
Adjust it for your site, plant and crew, and talk it through with your workers before work starts. Please make sure you read our Disclaimer before downloading this SWMS.
Checked against the Queensland laws and codes of practice listed above. Last reviewed November 2026.
Having trouble with your download? Contact us any time. Please read our Disclaimer before downloading.
How to use it
From download to site in three steps
Buy and download
Check out with card, Apple Pay or Google Pay. Your download buttons appear straight away and the links are emailed to you. Links work for 3 months, so save your copies.
Make it yours
Add your logo and business details in Word or Excel, or tick branding at checkout (A$29) and we add them. Then add your site and job details.
Brief your crew
Talk it through with the workers doing the job, have them sign on, and keep it on site. Review it whenever the job or conditions change.
What format is it?
Microsoft Word. Edit it in Word, or free in Word for the web, and add your own logo and business details. Or let us do it: tick "Add my business name and logo to every document" at checkout (A$29, free on orders of A$500 or more) and fill in a short form after payment.
How do I get it after I pay?
Your download buttons appear as soon as checkout finishes, and the links are emailed to you. You can re-download from your account at any time.
Is it compliant with Queensland law?
It's written around Queensland's Work Health and Safety Act 2011 and Regulation 2011. Tailor it to your site, consult your workers and review it whenever conditions change; no template can guarantee compliance on its own.
What if it isn't right for my job?
If it doesn't match its description or has a fault, tell us and we'll fix it. If you're still not happy, we'll refund you or give you store credit, your choice. Check the sample pages first, as we don't refund a change of mind.
Only logged in customers who have purchased this product may leave a review.







Reviews